This model is designed as a connector used to protect cables passing through holes. It is customizable and should adapt to any cable and hole diameter. The connection is printed in an arc shape, which closes to form a complete circle when inserted.

The open SCAD routine requires four parameters:

D1 is the diameter of the hole

D2 is the diameter of the cable

T is the depth of the hole

角度

You can refer to the included pattern to see the function of these parameters.

If you change the value of Ang, the code will automatically change the diameter of the 3D model so that it completely matches D1 and D2 when it is closed. That is, if you require a small angle, after forcing the closure, the diameter of the marked connection will increase to a circle with a diameter of D2.

This model should be printed using TPU or other flexible materials. Support would be helpful.

For detailed instructions on how to use customizable components, please check here:https://www.instructables.com/Learn-How-to-Use-Customizable-3D-Models-With-OpenS/