Right Rail
V0RRA
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2022-10-06 05:20:44
0
0
000Description
Source du modèle
Avis(0)
Summary
The original STL has right and left rails in one file. I just cut off the left one with Meshmixer. If you need the left rail, just mirror the right rail.
It took around 10+ hours to print with CR-10 and 0.6mm nozzle. Therefore, I like to print one at a time. The rails were printed with PLA+ 20% infill and extended arms were printed by PETG with 50% infill.
Source du modèle
Lien original: Voir les détails
CC BY