Spool Mtg Bracket
hall959
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2014-04-25 07:33:20
0
0
000Description
Source du modèle
Avis(0)
Summary
Recently, I purchased some new PLA material and found out that the spoolâs that hold the PLA have changed. They are now more narrow and with a larger OD. This larger OD interferes with the power and USB Connectors on the back of my MakerBot. So, I decided to move the spool to a new location.
Just print the Main Mounting Bracket (2.5hrs on low print settings) and mount to the table in position you want. I elected to mount it perpendicular to the back. Use OEM Spool Bracket and attach to the new Main Mounting Bracket.
Note; the Main Mounting Bracket is tall enough to accommodate the new spool OD. But, if you have any parts mounted to OD of the spool; just print the extra Spacer part (55minâs on low print settings) to lift spool extra 1/2" higher.
Source du modèle
Lien original: Voir les détails
CC BY-SA