This was intended to be a hot-end mini light-bar that was to be mounted under my Ender 3 Pro fan shroud. After trying out for size, I think it might be a sniff to low over the print and might hit the part causing all sorts of grief so I didn't end up mounting the part.

I've instead decided to re-purpose it for another project. If somebody does try it out, please let me know how it goes - Be warned though it might just be a problem for this application.

The LEDS are some really cheap white 0805 LEDS on a PCB with a current limiting resistor. They run off 5 volts and with all 5 together they would have provided enough light to do the job. They were sourced from Bangood (https://www.banggood.com/5Pcs-3V-5V-40MA-LilyPad-LED-Module-Pure-White-p-959589.html?rmmds=myorder&cur_warehouse=CN)
for about $2AUD for the 5 pieces.

You can print this is whatever you like I guess, I printed in ABS just in case I used it in my chamber. I printed it flat on its back with supports (bed only) that enabled the visor to be printed successfully.

Creality

Ender 5

No

Yes

0.16

100%