3D MODEL DESCRIPTION This model is completely customizable by creating a model of your needs that is a hexagon with a side of 28.637mm that can be fitted inside. The screw to be used to attach the model cannot be wider than 4.50mm. As shown in the photos. If you find the piece slightly hard to insert it is normal, but I assure you that it is easy to remove if you need it. The beehive-shaped structure is made to be added to itself and create a real beehive wall. The circular model was created to fit a mini vacuum cleaner with a diameter of 55.50mm. 3D PRINTING SETTINGS The print can be set as desired, the important thing is to have a quality between 0.12 and 0.2 mm. Personally I printed it with 0.12 mm quality, 15% fill, PLA filament, no supports, contact with the plate skirt. All printed with an Ender3 v2 no mods.