The previous owner cut out a large hole in the ceiling that made it impossible to mount a gang into. They used some awful wire hanger that was not at all satisfactory.

I decided to try to create a mount that would overlay the top, and drop screw holes down to be flush with the ceiling. This is for use outside the gang box (3 gang box) and should be fine for code in many places. However, I cannot guarantee it will pass code for wherever you are. It is a tight fit over the gang to slide over if you have already wired, or do not want to rewire the box. Otherwise, it is a simple slide into the ceiling, align the holes, and drop into place.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Infill:

15%

Filament:

eSun PLA

Black

Notes:

How I Designed This ===================

Designed in TinkerCad.

Category: Parts