This is a 100% functional tote bag that takes advantage of the flexibility unique to TPU filament. By setting the top layer and bottom layer to 0, it becomes a mesh bag that utilizes the infill. You can customize it to your liking by changing the infill pattern and density.

This design builds on my previous models to make it more complete as a functional bag. If you print it on a printer with a large build area, it could become a real, full-size bag. Someone give it a try!

Assembly:

1. Alignment of slit A and A'

2. Insertion of the handle through the slit as shown in the image below.

3. Repeat the above steps for B and B'

Notes:

• Be sure to print using flexible filament. It will not function properly with PLA or PETG.
• A minimum print area of 250 x 210 mm is required to print this model.

• If you are slicing the model yourself, please make sure the handle section is printed with an outer wall that is fully dense (100% filled).