The organ has a USB socket in a really hard to get at place.
Folks were having trouble plugging in so designed this mount.

This has a couple of 1mm strips that lodge in the USB socket end to hold the lead firmly. These strips match slots in the molded plastic socket. You may have to modify the design to suit your lead.

EDIT: I've added a plastic panel, actually cut from a chopping board, so the USB socket can be mounted a little further back, and the lead and USB stick mare protected, and hidden.

Wombot

Doesn't Matter

Yes

.2

100%

I did print it with a raft, but it really did not need it.
If you want to modify it......

https://www.tinkercad.com/things/dHxZgWqchZI-usbclamp/edit

As it was dark when it was screwed down, I missed with one screw, hence the extra hole in the organ's leg :(
I'll go back with a black marker pen and hide it a bit!

Another mod may be to cut into the lead end and expose the +5V and 0V leads so I can add a small LED to light up the socket. This is something I did not think of earlier.