Redesigned TeachingTech logo box. https://www.thingiverse.com/thing:3034821

Components:

• motion triggering (Mini HC-SR505 PIR)
• switch (KCD11 Mini 3A 250V)
• usb-c charging (5V 1A TP4056 USB C)
• based on ATTINY85 micro USB board from Digispark
• 2 x Panasonic NCR18650B 3400mAh rechargeable batteries
• 2 x battery box, rectangular with plates for 18650
• 4 x 6x2mm neodymium magnets
• 4 x short M3 screws

Additionally, you will need a 220x220mm front cover, fixed with magnets.

PET-G, ABS or ASA preffered because of charging temp (you can limit the charging temperature by changing the TP4056 configuration resistor, it will limit the charging current).

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.12

Infill:

Filament: Fiberlogy PET-G Black

Category: Electronics