MATERIALS:

power outlet.

glue to mount the faceplate to the box.

a screw for mounting the outlet to the faceplate (most outlets come with a screw).

wires rated for at least 15 amps at 120 volts (solid core recommended).

flathead and Philips head screwdriver.

wire strippers.

     SAFETY FIRST!!

     DISCONNECT THE POWER CORD BEFORE WORKING WITH AC POWER!

     USE EXTREME CAUTION WHEN DISASSEMBLING YOUR POWER SUPPLY!

     USE WIRES RATED FOR YOUR APPLICATION.

INSTRUCTIONS:

1.  attach the wires to the AC power input terminals on your power supply (keep in mind which wires are live and neutral) your outlet should turn on with the same switch as your printer.

     2.  remove the metal tabs from the top and bottom of the outlet.

     3.  attach the outlet to the faceplate using the screw that came with your outlet.

     4. feed the wires through the hole in the mounting box.

     5. Connect your wires to the outlet using the gold and silver TERMINALS (not the holes).

     6. glue the faceplate to the mounting box.

     7. slide the box onto the desired mounting location.

     8. don't go over the rated amperage of your wiring and fuse.