HI there

This is an improved version of the Visio Slide Projector found on Kickstarter a while ago.

Print the parts as they are with 0.2 mm in PLA no support needed

Everything else you need.

Semlos LED 5000 lm with 12 LEDs
Amazon link -- https://www.amazon.de/gp/product/B07PCR77PG/ref=ppx_yo_dt_b_asin_title_o01_s03?ie=UTF8&psc=1

1x old 52mm UV filter, cut from metal and grinded on a whetstone until opaque for better light distribution

5x M3 6mm screw
1x M4 15mm screw

White spraypaint
rubber band
black tape

and a nikon lens - 50mm 1.8 or 1.4 works great

Assembly:

Remove the top of the lamp, take the reflector an spray it white as well as the inside of the "front" and "back part".
Insert reflector, glass and transparent o-ring and push in the "back part", secure with the "ring part"

Secure the opaque glass with a small piece of rubber and place a piece of tape on the upper rim like shown in the pictures - it minimizes light leakage and prevents the slide from falling out.

Screw on the "front part" and attach a nikon lens and secure it with M3 screw
After a couple times of attaching and detaching the lens the printed F-mount will wear slightly out - therefore the screw

I hope you enjoy
have fun

gmec