Enjoyed my butterfly comb? Maybe you heard about my additional features I would add and now they're here!

Printing

Treat the "Trainer's Dummy Blade" as if it was the butterfly comb, 100% infill, no supports, no brim needed. 

The other two will need organic supports, a brim is optional.

Assembling

As a recap to assemble these, please have a hair dryer or a heat gun, with a pair of pliers because assembling is hot. Caution, please have supervision when putting together in case of burning. 

Apply heat from the hair dryer or the heat gun on the ball joint area on the handles for 30 seconds to a minute, depending on how intense you apply heat. 

After plastic is malleable, spread apart the joints slightly with a pair of pliers or your hands if you can't feel pain. Fasten the blade on and hold together the joints on the blade, then apply water for faster solidification. Repeat this for the second handle, make sure you do not flip the handles, or you may have to redo this process!

Design your own attachments!

Feel free to make your own designs that are compatible with my comb as well. The model for my comb is in the link below:

https://www.printables.com/model/857141-3d-printable-butterfly-comb

Update 5/22/24

Added a trainer blade and a real one (Careful!). Please comment if you want a specific design!

Have fun flipping around, and do not bring this to states where it is Illegal.