RC Model Control Horns
Tidy Nook
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2017-11-05 21:03:09
0
0
000Description
Tags
Source du modèle
Avis(0)
Control Horns
Various control horns for model Aeroplanes. They are fully parametrised but without error checking.
Parameters
| Parameter | Default Value | Description |
|---|---|---|
| hornBL | 36 | Length of the control surface |
| hornH | 12.5 | OA height of horn |
| hornO | 5 | Connection offset |
| holeN | 1 | Number of holes |
| holeDia | 0.8 | hole dia |
| holeTop | 9 | distance from bottom of horn to top hole |
| holeBottom | 9 | distance from bottom of horn to bottom hole |
| controlT | 0 | Control surface thickness |
| plateHoles | 1.8 | fixing holes |
Modules
| Module | Description |
|---|---|
| LH_Horn(); | Fixing plate on left hand side |
| RH_Horn(); | Fixing plate on right hand side |
| Horn(); | Draw Horn |
| Fix_Plate(); | Adds a flat with screw holes to the horn |
| Horn_X(); | A flat plate with screw holes cut to allow the horn to be inserted |
| Rt_Plate(); | angle plate use two to sandwich the control horn |
Flite Test Mini Control Horns
3D printed version of the Flite Test Mini control horn.
Parameters
| Parameter | Default Value | Description |
|---|---|---|
| plateX | 21.5 | Length of horn |
| plateY | 18 | Height of horn |
| plateThck | 2; | Plate thickness. Plywood ones are 1.5mm |
| push_hole_r | 0.5; | Mark the hole centre drill it out to correct size |
Modules
| Module | Description |
|---|---|
| Control_Horn | Draw the control horn |
Hint
These parts need to be strong. Print with 3 or 4 shells and 50% or greater fill.
Sources
Tags
Source du modèle
Lien original: Voir les détails
CC BY