Summary

DON'T PRINT THIS ONE! GO TO PRINTABLES TO GET THE NEW ONE.

https://www.printables.com/model/4907-lazer-tag-combobulator-case

This is a bespoke case for the Combobulator, which is a custom built wireless hosting device for use with Lazer Tag Team Ops (LTTO) compatible laser tag toys from Hasbro/Tiger/Nerf, including the Nerf Phoenix LTX and the Lazer Tag AR (LTAR), not to mention the original LTTO line, the Deluxe, IRT-2X (Drone), and Tag Master Blaster (TMB). For more information on that device, please go to http://combobulator.weebly.com/

This case is designed to hold the Combobulator board using M4 screws. There is a channel on one end for the power wire to be guided up to the top area from the lower chamber where the battery pack fits. If you have a different power source, or power connector, than the one that came on my unit, this model may not work for you.

The lid is intended to be printed in an IR transparent material. I used a plain translucent PLA, which seems to work well. It's ideally printed in vase mode, upside-down.

There is some bridging in the main case part, and the walls can cause some lifting, so I used a brim for a solid print, and lots of cooling for the bridging.