Retro-Style electronic box
ScottRamirez
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2022-02-22 08:54:15
0
0
000Description
Source du modèle
Avis(0)
Summary
Hi!
This is my first thing I publish here and I hope you find it well! It is done with FreeCad. My engeneering-abilities are low. I created it while restoring a scrappy TRONXY X1.
This retro-style electronic-box is dedicate to ENDER-3-/CR-10- & SKR Mini E3-Boards. The top-cover is for the CR-10-stock-display.
I printed it with 0.02mm layer and infill at 15%.
www.i-print-ti.de
Print Settings
Printer:
CR-10 Clone
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Notes:
You need (without warranty) ...
5 countersunk screws M3x12-16mm with 5mm distancer und nuts for the board,
4 screws M3x16-20mm with nuts for the two fans,
2 countersunk screws M3x12-20mm with 5mm distancer and nuts for the display.
One Creality board for ENDER-3/CR-10 or SKR Mini E3 or similar,
one CR-10-stock-display. Two 40x40x10mm 12V fans.
I recomm you to use felt feets at the bottom.
PS : Added a dual-fan-grill for the fans on the back.
Source du modèle
Lien original: Voir les détails
CC0