Vertical mounts for the Elgato Stream Deck, including one to match the Stream Deck Plus. Compatible with Stream Deck Mk1, Mk2, and Scissor Key versions.

The “SDPlus” variant matches the angle and style of the Stream Deck Plus, so that the two can be placed side-by-side to form a single panel. This is compatible with the Stream Deck Plus XLR or USB hub attachments. For a clean look, match the stand colour to the Stream Deck faceplates. Add a "Stream Deck Plus Plus" front overlay to convert it into a single device:
https://www.thingiverse.com/thing:7140558

Three other variants have a slightly smaller footprint and various angles (40, 50, and 60 degrees) to suit different needs. The 50 degree variant is the same angle as the stand included with the Stream Deck Mk2/Scissor Key. These variants are borderless, and any colour can be matched/contrasted with any faceplate.

The models are oriented for the Stream Deck to be rotated 90 degrees anticlockwise, with the cable out the left (Mk1) or rear (Mk2/Scissor Key). Mirror the model in the slicer to use in the opposite orientation.

For best quality, print on one side with the faceplate facing the front, using tree supports and 60 degree threshold angle. After printing, applying a self-adhesive non-slip pad or feet to the base is recommended - for the Stream Deck Plus variant, this should be 1-2mm thickness to match the height.