Surface 3 Pro power supply case
Lucia Atkinson
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-03-07 12:05:25
0
0
000Description
Tags
Source du modèle
Avis(0)
I have a refurbed Microsoft Surface 3 Pro. , the power supply was not the OEM with the extra USB in front.
I had one of the right one, but sadly the capacitor was bad. This is not something there are impossible to repair but after that, the plastic case looks like a wreck.
I have made this new case for the supply. They are two models: the first no 1 have a slit inside the case to the screw, No 2 has more beefy surroundings around the screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
200
Infill:
20
Filament: Fiberlogy easy PET-G PET-G Your choice :-)
Notes:
The blue case is printet in Smartfill PLA it's nice but I have some concern about PLA for a 230V PSU. Next was printet in PET-G
Use M3 screw, and a 3M Tap for prepaire. The lids hole can be drilled up to 3mm, if too tight.Tags
Source du modèle
Lien original: Voir les détails
CC-BY