UChicago
jonathan_thompson27
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2024-02-27 22:56:10
0
0
000Description
Source du modèle
Avis(0)
A model of the UChicago campus.
V2->V3: Thickened base plate
Disclaimer: I do not attend UChicago and am not familiar with its campus, so the model boundaries were estimated from online maps.
Print Settings
Resolution:
0.1 mm
Notes:
Since the raw STL is very large, it'll need to be scaled down to fit on most printers. For getting nicer-looking prints, I highly recommend increasing the Z scale (relative to the X/Y scales); although the resulting model will no longer technically be "to scale", I've found that it looks much nicer this way. I personally print with Z scales in the 130-200% range (relative to the X/Y scale): 130-140% when printing specific buildings, 180-200% when printing larger areas.
PSA: I've found that these sorts of models can be very prone to issues with stringing.Source du modèle
Lien original: Voir les détails
CC-BY-SA