A set of recycling waste bins, for all your waste filament (poop, build failures etc.)

I've created them in multiple sizes, so that you can separate your different waste types, in case you want to make new spools out of the waste material. There is a 60x40mm recess (0.4mm deep). I left it blank, so that it can be used for labels, or text object(s) that you can add in your slicer. These will replace my previous attempts, as I almost know what I'm doing with Fusion 360 now!

The sizes are as follows (x,y,z axis respectively):

• Large: 200mm x 200mm x 150mm
• Medium: 150mm x 200mm x 150mm
• Small: 100mm x 200mm x 150mm
• Smaller: 100mm x 100mm x 150mm
• Smallest: 100mm x 50mm x 150mm

My thinking with the various sizes is that you can print larger bins for more commonly used filament types, and smaller ones for your occasional use filaments.

If you have any suggestions or anything, please don't hesitate to get in touch