Quick To Print Large Vice

Notes:
This design is primarily a good starting point for remixes and the OBJ files have been included

print Settings:
nozzle diameter: 0.40mm && 1.0mm
layer height: 0.20mm && 0.75mm
infill: 25%
support: Yes only small amount though
walls: 4 && 2
top and bottom layers: 3 to 4
material: PLA

Parts Needed:
NONE

Special Instructions:
print both the screw and nut with 0.2mm resolution on a 0.4mm nozzle
print the nut at 102% scale
file the screw ever so slightly where the layers start and end to clean up the edges
print the vice body 0.75mm resolution on a 1.0 mm nozzle
print the vice jaw with support in the cut out for the nut

please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs

please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones
https://paypal.me/3DCarter383?locale.x=en\_GB

Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament:
PolyMaker PETG

Category: Hobby