Ceiling Mount for Round LED Panels
f0ggyrod
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2018-02-22 04:02:04
0
0
000Description
Source du modèle
Avis(0)
Summary
Round LED panels are inexpensive on Ebay, but are designed for mounting recessed in a ceiling.
This model provides a small socket for the lights to mount in, making them much easier to mount on an existing surface with permanent tape or screws.
I am happy to make modifications to this to suit your purpose- just let me know!
Print Settings
Printer:
Anet A8 (Stock)
Rafts:
No
Supports:
Yes
Resolution:
.2 mm layer
Infill:
20%
Notes:
I used Cura 14.07 grid supports for the gaps in the side and that worked quite well.
All other features should pose no issue.
Post-Printing
This is the LED light I purchased. (https://tinyurl.com/y88jrd2a)
This socket is designed to accept the spring-loaded flanges on the sides of the LED panel.
It can then be mounted on smooth surfaces cleanly.
How I Designed This
I mocked up a quick copy of the LED panels, then made the socket, checking to see that clearances were good, and that the flanges would line up appropriately.
Source du modèle
Lien original: Voir les détails
CC BY