K-Cup Carousel with a roller base
KatherineHernandez
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-03-31 13:30:17
0
0
000Description
Source du modèle
Avis(0)
Design is based on an inverted vase with a spiral cord wrap to which I added the holes for the full size k-cups .
Printed on a Creality Hi 0.4mm nozzle but at 202mm (8") diameter and 186mm (7 3/8") high will also fit a K1C plate.
The carousel with handle takes 14 full sized K-cups in a spiral pattern.
Printed using Creality soleyin matt moonstone filament which gives a nice chalk finish. The handle is generic PLA silk silver.
The body alone can be be used as a carousel without printing the handle or roller base.
The hole on the top for the handle fits a K-cup if you don't want a handle.
The roller base takes 3 rollers available on Amazon https://www.amazon.com/dp/B07VGGVXMH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1. The rollers are a tight fit so I used hot water to soften the holes before pushing the rollers into place.
Source du modèle
Lien original: Voir les détails
CC BY-SA