Drill Bit Stand
cube.hobby
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-02-18 01:29:00
0
0
000Description
Source du modèle
Avis(0)
Drill Bit Stand
print Settings:
nozzle diameter: 0.40mm
layer height: 0.20mm
infill: 25%
support: NO
walls: thickness or at least 1.0mm
top and bottom layers: 3 to 4
material: PLA
Parts Needed:
Drill Bits: https://tinyurl.com/9ejd8e8h
Special Instructions:
drill out holes with corresponding drill bit
please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs
please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones
https://paypal.me/3DCarter383?locale.x=en\_GB
Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PETG Category: DIY
Source du modèle
Lien original: Voir les détails
CC-BY