Airpod Mesh Replacement
Nifty Clay
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-04-04 05:12:14
0
0
000Description
Tags
Source du modèle
Avis(0)
I always clog up the mesh on my Airpods with earwax and rip the mesh out. This time I decided to print a replacement that I can throw away and replace easily. This is for my Airpod second generation. I included the fusion file, the stl file, and a file you can load right into PrusaSlicer (assuming you have a .25mm nozzle).
NOTE- Don't blame me if you damage your Airpods putting these in, or they fall out and get stuck in your ear canal or something. Use at your own risk!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
Notes:
You should print this with a 0.25mm nozzle or smaller! I sliced in PrusaSlicer with no top or bottom layers, 2 perimeters, and a rectilinear fill pattern at 30%.
Tags
Source du modèle
Lien original: Voir les détails
CC-BY-SA