I like this idea, but planned to mount directly into wall or home built rack.

I also wanted to use all 3' for 5/8" steel rod I got from the hardware store...

So I changed it to be just a screw hole, and modified to make a mid-rod support mount. It worked so well I built two more! One for work and one for the garage, haha. My Ortlieb and Lone Peak pannier can hang with the mid-support mount in between the hooks.

Build steps:

Print at ~35% infill, on side for more strength

-Two end pieces

-One mid piece

Purchase/source

-5/8" rod (non-threaded)

-6 screws (I used self tapping, cabinet screws, ~ 1 3/4" long)

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: Matter Hackers PLA

Category: Organization