Layer Height: 0.2 mm

Print Speed: 50–60 mm/s

Nozzle Temperature: 200°C

Bed Temperature: 60°C

Retraction:

Distance: 4–6 mm (Bowden) / 1–2 mm (Direct Drive)

Speed: 40 mm/s

Cooling Fan: 100% after first few layers

Wall Line Count: 2

Infill: 100 %

Supports:

Enable Support: Yes, for overhangs > 60°

Support Pattern: Zig-Zag or Lines (easy removal)

Support Density: 30%

Support Overhang Angle: 60°

Support Z-Distance: 0.2 mm (for easy breakaway)

Support Placement: Touching Build Plate (to reduce cleanup)