TM1638 LED&Key Case
Yara Fuentes
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2019-04-21 14:06:12
0
0
000Description
Source du modèle
Avis(0)
Summary
A case for the QiFei(?) TM1638 Led&Key module with integral buttons.
The pin-header on the module has to be desoldered or resoldered to the back, (at least it had to on my module...). I used M3 screws and M3x4mmx5mm embedded nuts to mount the module. The embedded nut can easily be set with a soldering iron.
The two halves can be (permanently) glued together or (reversably) fixed together with tape.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20%
Notes:
Printed at 0.95mm line width (with a 0.8mm nozzle), printspeed 60mm/s
Source du modèle
Lien original: Voir les détails
CC BY-SA