BenChooChoo, the Benchy train! Complete with cow catcher, boiler tank, oversized smokestack, and optional base with train wheels! 

The wheels are fixed and do not spin, some assembly is required if you choose to print this optional add-on. Wheel to pin tolerance is 0.20mm. I did not use adhesive for my assembly or images, although you may choose to do so if the tolerance ends up being loose, or adjust your XY hole compensation in your slicer accordingly for wheels which are too tight/loose.

To honor the spirit of Benchy, this model prints without any supports and features extra overhangs, bridges, and a small contact area on the cattle catcher to test the limits of your bed adhesion. 

This model is being released as CC0 / public domain with no restrictions. 

Special thanks to: 

@CreativeTools for 3dBenchy, found here: https://www.thingiverse.com/thing:763622

@PrusaLab for their CC0 train model, found here: https://www.printables.com/model/46315-train

@GE46_935775 for their CC0 train wheels, found here: https://www.printables.com/model/578791-model-train-wheel-for-5-gauge-garden-railway

While this model could have been created without their donations to the public domain, I thought it might be fitting to find other CC0 models to mix into this. 

Suggestions for improvement are always welcome, thank you for your time!