Designed this clamp to be able to be able to install the machine on the table without cutting it. It is suitable for 20 mm tabletops max.

If your tabletop is thicker print Clamp-for-CSM_addon.stl and install it between clamp upper and lower half to make the clamp bigger (each addon adds 2 cm to the clamp). Take note that you'll also need respectively longer M5 bolts to connect the parts together.

Anycubic

All-metal Mega

Doesn't Matter

Yes

0.2

20% / 100%

1. I recommend to use 100% infill for some parts to make them stronger. See picture for details.

2. You'll also need some additional hardware:
   • M5x60 bolts with nuts - 2 pcs. <= Note that these bolts should be longer if you use clamp addons.
   • M5x40 bolts with nuts - 2 pcs.