This shoerack was designed for a narrow space I have at home, where I needed to store some footware.

There are two ways this can work.

Pictured is V1, where the printed shelves are screwed into a wooden board with 4 wood screws (3,5x16), that is mounted on a wall with 4 regular screws.

V2 has no screw holes for a cleaner look, and must be screwed to the wooden board from the other side first, before mounting to the wall.

Single piece measures 17,5 x 24 cm, 4 pieces fit 70 x 24cm wooden board.

Printed with PLA, at least 3 perimeters and 15% gyroid infill.

Feel free to remix and edit as you like and enjoy!