This is a twisted customizable pot. You can change it's height, width and twist ratio. There are random holes drilled in the pot. You can adjust the "poly" value if you don't want the low polish effect on the sides.

This has been made with OpenSCAD.

Ultimaker

Ultimaker 2

Doesn't Matter

Doesn't Matter

I used 0.2 but any should be fine.

20% But anything should be fine

You can use supports if the holes are too big. I didn't use use any for the model on the picture.
(Use a raft if you print it with ABS)

I've printing it using some semi-transparent filament and that renders great as you can see on the picture ! Of course any other colors would suit.