Springfield Hellcat Optic Mount

robert_perez

Trouver des similitudes avec l'IA

Aucun fichier source du modèle

Publié:2022-02-22 17:21:10

Description

Summary

This Is a competition mount/ recoil thumb brace for the Springfield Hellcat. Remix, props to the original designer.

Print Settings

Printer Brand:

XYZprinting

Printer:

da Vinci 1.0 Pro 3in1

Supports:

Yes

Resolution:

.2mm

Infill:

at least 50%

Filament: Whatever your printer likes Take heat requirements into consideration ABS may be necessary. Spicy colors or classic Black

Notes:

I used PLA raft and support to keep warping to a minimum. You cannot print without supports. I would suggest printing in a stiff durable material.

Post-Printing

After Print

After the print you will need to do some sanding and filing to get the two sides to fit properly over the gun. once the two sides are fitting well, then you can use a small drill bit through the larger pin hole next to the take down (see fig.1) to mark and drill a hole in the left side of the mount. This hole is intended for an extended pin to be inserted for extra bracing, but may not be entirely necessary. You will also need to acquire a nut and screw for the picatinny rail clamp, the newest version (v1.1) fits a #8 machine screw/nut.

Fig.1 The pin I'm talking about. image sourced from https://clingerholsters.com/springfield-hellcat-vs-sig-p365-with-pictures/

How I Designed This

I just used tinker CAD and found a 3d file scan of the hellcat. using the 3d file I was able to proportion everything.

Change log

The old files will always be available.

v1.1 -Rail fits better
-changed the screw/ nut to a #8, metric comparison is 4 mm.

Source du modèle

Lien original: Voir les détails

CC BY