Designed around the SD-card adapter on the last 2 pictures, but my guess is that many SD adapters probably comes from the same factory or has similar enough dimensions to work.

Supportless design. 

Easy mount/dismounting, uses stock screws and has easy access from the front holes.

Can hold 1 extra full size SD-card for better workflow.

You fold in the ribbon cable straight and push the adapter into its place forming a snug friction-fit that holds it securely. then plug in the ribbon cable into the micro SD slot on the printer, and screw it back onto the left frame with stock screws.

It has a hole from the side to accept an angled usb cable for if you have a raspberry pi setup in the back. However it does not have a front hole for the usb connection since I never use straight usb-cables on my machine. If anyone wants it to be able to take straight usb let me know and I will post a V2 :)

I have been using it now for around a year, works good and has never given me any issues. Seriously improves my workflow!

if you like this, check out my other stuff :)

if you like my work, consider donating :)

https://ko-fi.com/jobis