Need a multiboard holder for you curve gripped X-Acto knife and its extra blades? Or just a holder for a marker or pen? Try this MultiConnect Peg X-Acto Knife Holder!

I've included STLs for holder with 2 baskets for extra X-Acto blades(or anything else you could think to put in them), and a standard one with just the knife holder.

It uses a MultiConnect Peg to mount it to a Multiboard, so you can easily move it around to your ideal place. 

I've included the STEP file for the holder so you can resize or adjust if necessary.

Print Instructions: The holder itself I printed at a layer height of .2 mm and 10% Gyroid infill pattern. (The peg slot has a .2 mm tolerance btw)

The MultiConnect Peg I would print with 3 parameters at .12 mm layer height. I used a 10% Gyroid infill pattern but you can probably go up to 20% if you like. I would use a smart brim at a .25 distance to make sure it doesn't come up during printing. I was printing at 145mm on my Neptune 4 Plus, but you probably should print it slower.

Credits to Jonathan (KeepMaking) for creating multiboard