I can't find the original set of sockets I made it for, but it is similar to the "BOEN 1/2" Drive Wheel Protector Impact Socket" 3Pc 17-19-21mm set on amazon. Also included a space for a slim wall 19mm impact socket from snap-on, P/N: SIMMF19A. I've found that slim wall is needed on a lot of wheels that the non-marring sockets won't fit in.

Images are of it printed in Novamaker PLA+ green, Black text is Generic PLA.  All stock generic filament settings on BL X1C, see below for print setting changes.

The base model does not come with text, as working with text in fusion is beyond infuriating to me as a beginner. I find it much easier to add after the fact in orca slicer, so the .3mf file does have it added, at a 1mm text height. 

Modifiers for print: 

-Changed bottom layer thickness to 2mm and top layer thickness to 1mm for some extra beef. 

-Added a cylindrical modifier around the cone and thin rods to add additional wall layers and infill density to increase strength since the rods are relatively slim and long. Without that, I accidentally popped off one of the rods getting it off the print bed. All this is in the .3mf as well.

-No Brim or supports Needed.