Dice containers designed to fit in a standard collectible card box column, 78.5mm wide by 107.75 mm tall. Designed to fit well alongside my cardbox deck boxes. Each lid has some extended bits to stop dice from rattling around inside.

24mm container holds 8 standard Magic spindown dice, or 3 and a standard 7 die set of 24mm dice.

12mm d6 container holds 80 12mm d6 dice.

Printing instructions:

1. Download both parts of desired version
2. Load both into slicer, leave in downloaded orientation
3. Brim should not be required for either version. 24mm body may need supports for the bridges (I recommend organic supports).

Known Issues:

• 12mm d6 container opens too easily from my experience, I reduced the lid clearance before uploading, but I have not tested that change yet.
• 24mm container may be difficult to get dice out of with the bridges on top.
• Some of the 24mm container's bridges broke on the flight back from PAX. This may be an issue of material choice on my part

Planned changes:

• Try adding a snap to the lid tabs to keep them closed.
• 18mm d6 variant
• Large Magic spindown variant