A box to store 6mm thread/ CR-10 nozzles. The one in the pictures is different from the final piece in the pictures, because i adjusted how much space there was between the rows of nozzles. I printed mine in Hachbox wood PLA.

Creality CR-10s

No

Yes

.15 to 2

15% to 20%

the only parts that need supports are the two main halves of the box. In the slicer lay the parts with the flat side facing the build platform.

The hinge axle will need to be sanded as'well as the holes of the hinge, but don't sand the thread on the axle.