The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.

 You may print at higher layer heights below the Min Depth of 0.48mm

 Actual Depth is 2.1mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Gray Transmission Distance: 2.5

PLA BambuLab Basic Gray Transmission Distance: 3

PLA BambuLab Basic White Transmission Distance: 6

This print uses 4 unique filaments. Substitue to your own needs.

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Blue Gray

At layer #16 (1.36mm) swap to Gray

At layer #20 (1.68mm) swap to White for the rest.