Summary

Miunchkin

Game box insert for Munchkin (small box) with plenty of space to add expansion decks. Made to accommodate sleeved cards, but unsleeved cards will also fit. The box will sit up higher than how it is came, but it is still sturdy.

The spacers blocks can easily be adjusted in Cura. Maintain one face at 91mm and a height of 35mm.

Game tip: Use d10 dice for character levels.

Sliced with Cura 4.4.0 and the settings used were optimized for print speed.

Line Height - 0.28
Line Width - 0.4

Wall Thickness - 1.2
Wall Line Count - 3
Top/Bottom Thickness - 1.04
Top Layers - 3
Bottom Layers - 2

Infill Density - 10
Infill Pattern - Grid

Print Temperature - 210
Build Plate Temperature - 60

Build Plate Adhesion Type - None

Printed on a Creality Ender 3.

The filament used was Overture 1.75 PLA

Feel free to leave comments and post your finished prints. I will be creating a catalog of game inserts for many popular games. Donations are always welcome, as a lot of this is trial and error as I test these designs.

Dogecoin address: DSfAqQ1mBXngnwPSXKJcRcockx51WDFFgK