Glow Moose
KindMat
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
2
0
0
Publié:2026-02-10 19:20:43
0
2
200Description
Tags
Source du modèle
Avis(0)
Moose Head by MorenaP for Materio3D scaled to 100 mm wide and modified to take a NeoPixel Diffused 8mm Through-Hole LED. Use the clearest filament you can find and you've got a rainbow glow moose!
Licensing requirement from creator: if you create a derivative of this, please keep the logo visible somewhere.
(I had to move the Materio3D logo from under the LED void.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Generic PLA Clear
Notes:
Use the clearest filament you can find. I found that printing solid with radial infill helped with the material I used.
Hard to believe but this model doesn't need supports!Post-Printing
Tip
Clear PLA tends to form very fine threads unless you print very slowly and manage retraction extremely carefully. Running a heat gun very quickly (a couple of seconds) over the model makes most of these go away. PLA melts quickly, so keep the heat gun moving.
Tags
Source du modèle
Lien original: Voir les détails
CC-BY