Articulated modular camera mount for the Raspberry Pi Camera. I made this to mount a PiCam to my Ikea Lack enclosure. The brackets screw together to form modular articulation links allowing flexible orientation in 2 axes. Each bracket can attach to another bracket with M3 screws with 8 mm spacing.

Tested with the PiCam v2.0 camera.

Uses the following M3 hardware:

• M3 hex nuts - 3x per nut_side_bracket
• M3x25 cap head screws - 1x per articulation joint
• M3x8 cap head screws - 2x per bracket to bracket joint.

I used this model to manage the ribbon cable in my Lack enclosure: https://www.prusaprinters.org/prints/100682-customizable-ribbon-cable-clip-with-screw-attachme

Print Settings

Rafts:  No

Supports:  No

Resolution:  0.2

Infill:  20%

Filament:  eSUN PETG Black 
 

Notes: 

Each bracket is designed to print on its flat surface without requiring supports, raft, or brim.

If you liked this model, please consider buying me a coffee!

 Buy me a coffee