This is still a work in progress and the instructions and model uploads will be made clearer and easier to follow in the future.

This is the third themed version of my original moveable figure for all you racing fans out there. The figure reuses some of the parts from the original model which are listed below. To avoid duplicate models I have only included the different STLs in the individual STLs section. I have a number of different team designs and helmets that I will be uploading when I can work out the cleanest way to do this, so be sure to keep checking back to see what's new.

Additional parts needed from the original:

• Arms
• Arm pins
• Hands
• Head top
• Head bottom
• Hips

Print instructions:

All files have been printed and tested using various brands and colours of PLA/PLA+ on my Prusa Mk4, Prusa Mk3S with MMU2S and my frankenstein 180x180mm bed slinger with the following settings:

• Nozzle size 0.4mm
• Layer height 0.2mm
• 2 perimeters

I haven't found any other setting to affect the fit and function of the assemblies however for the head it is beneficial to observe where the seam placement will end up in the slice preview. the head to neck fit is dependent on your extrusion multiplier calibration. The default settings for both of my Prusa's provide the desired fit.

Assembly instructions:

Please refer to the assembly instructions in the original model.