This is a filament painting of a wolf in front of a moon.

It was made by using Midjourney, using the imagine of “wolf, moon, risograph, black, gray, white --q 2 --ar 1:2”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Uses a 0.4mm nozzle.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 2.5
PLA PolyLite White Transmission Distance: 5
PLA PolyLite Aqua Blue Transmission Distance: 7.5

Swap Instructions:
Black until layer #10 at 0.88mm
Grey until layer #16 at 1.36mm
White until layer #23 at 1.92mm
Aqua Blue for the rest.