INTRODUCTION:
THIS IDEA WAS DEVELOPED HAVING INTO ACCOUNT THE PEOPLE WHO ARE UNDER PREVENTIVE AND MANDATORY SOCIAL ISOLATION (ACCORDING TO ITS NAME IN ARGENTINA) AND WHO HAVE A 3D PRINTER IN THEIR HOME.

ORIGIN OF THE IDEA:
THE IDEA EMERGED THROUGH A PROBLEM AT HOME WHICH WAS THAT THE FOOD BAGS AND OTHER ELEMENTS OPEN WITHOUT POWER CLOSING AND THOSE INDOOR FOODS BECAME RANCID OR IN BAD CONDITIONS, WHICH LED PEOPLE TO DISCARD A LOT OF FOOD AND TO LEAVE THE HOUSE FOR SHOPPING.

IDEAS SEARCH:
FIRST WE HAD TO FIND WHAT SIZE THE AVERAGE BAGS WERE AND ALSO SOME TYPE OF SYSTEM WHICH ALLOWS ITS RELEVANT CLOSED.

DESIGN:
THE DESIGN WAS MADE IN FUSION 360 AND SEVERAL TYPES OF MODELS WERE MADE TO OBSERVE WHICH WAS THE MOST SUITABLE AND WE CAME TO THE CONCLUSION THAT THE MODEL WE HAVE NOW WAS THE RIGHT ONE.

Print instructions

3D IMPRESSION:
IT IS RECOMMENDED TO USE THE FOLLOWING PARAMETERS (IT IS IMPORTANT TO CLARIFY THAT THEY MAY VARY ACCORDING TO THE BRAND AND MODEL OF THE PRINTER):
• LAYER RESOLUTION: 0.2mm
• WALL THICKNESS: 1.2 mm
• FILLED: 50%
• PRINTING SPEED: 70 mm / sec.
• NOZZLE TEMPERATURE: 210 ° C
• TEMPERATURE IN HEATED BED: 70 ° C
IT IS ALSO NECESSARY THAT THE FILAMENT MANUFACTURER RECOMMENDS BETWEEN 60 ° C AND 80 ° C OF HOT BED AND BETWEEN 180 ° C AND 220 ° C OF NOZZLE TEMPERATURE. THE IMPLEMENTED PRINTER WAS ALSO A TRIMAKER COSMOS ll (MADE IN ARGENTINA)