An external spool holder for the Flsun T1 (Pro). 

Since attaching the spool to the printer is getting on my nerves and my printer is very high and I therefore don't want to put a spool on it, I came up with this solution.

It can accommodate standard 1kg spools up to 75mm wide.

The cap is glued with superglue, with the excess facing upwards, as shown in the photo.

I uploaded the model for either the right or left side.

Printing with 4 walls and 25% filling. I used PETG. 

For fastening, 2 pieces of M3x10 or M3x12 with large washer and 2 pieces of M6 PTFE hose holder are needed. The spool holder is attached to the screw connection of the Glass. An M6 thread can be cut in the hole in the cover of the printer for the PTFE hose holder.

Have Fun!