Stand for a Raspberry Pi with the 7" Raspberry Pi Touch Display.

I kept the back open for easy access to all Raspberry Pi connections and the memory card.

Printed with all default settings face down, with supports, so that the display edge comes out nice and smooth. Supports are absolutely required, but all come off easily.

https://www.raspberrypi.org/products/raspberry-pi-touch-display/

P.S. #1 This case is too big to print in one piece on my Lulzbot Mini, so I printed the teal version in two pieces, and glued them together. I made a small adjustment to the base after printing one side, and that's why the back of the base looks a bit different on the two sides.

No

Yes