Simple gift for your loved ones. Simply print it out and put it into an envelope. The recipient can now take out the parts with a pair of twezers or scissors. Its very simple to put together, Just take the main body, take two of the four stands and put it in the holes on the bottom of the body, put them all the way in, could be a litlle tight but that is perfect. Now use two of the four hand pices/ sticks, doesnt matter which ones there all different but all will fit. After that, take one nose and put it into the hole in the snowmans face. Now repeat the same again in order to assemble the second snowman. You should now have two snowman.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

100%

Filament: 

PLA
 

Notes

Please ignore the following if you are using a FDM-Printer with a 0.4 mm nozzle:

There is a file called "snowman_card_thight_fit" use this one if you want to print with something like a resin 3D-Printer. The hole for the nose has zero tolerance in this file. I found out that nomal 3D-Printers with a 0.4 mm nozzle cant print this tolerance quite right. Please let me know via personal message or comment if you have problems while assembling the nose.