As a follow-up on my temperature-tower for Bambu Studio, I created this Acceleration-tower. (and also a speed-tower). Its width is designed to fit in a 1x2 gridfinity basket.

The general presets work, but I want to explore the effects of faster acceleration settings. I designed and tested it for a Bambulab X1. The G-code is based on height, so if you copy the G-code you can also use it for other printers. 

You can select any kind of filament profile & settings you like (also PLA, ASA, etc). 

The g-code is included in the preselected "Bambu …. - Acceleration" machine profile. In the section ‘g-code layer change’. (included in the 3mf project file).  

You can also choose to open de 3mf as geometrical-data only with manual adding the G-code. Or you can use the simplified STL, e.g. for use with other software.

All 3mf-files include a 0.4 and a 0.2 nozzle profile with machine G-code (and settings preset ) for the acceleration tower. 

On request I have added the last file which also includes 0.6 and 0.8 nozzle machine profiles (and settings preset), but as I only have a 0.2. and 0.4 nozzle, I could not test this last file.

Please feel free to try-out and find your own settings. And let them know in the comments.

Below I added the g-code that I used in the file ‘3.000 - 20.000’ on the machine code layer-settings:

;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
{if layer_z>=00.05 and layer_z<10.05}  M201 X3000 Y3000   M204 P3000 R3000 S3000 T3000  {endif}
{if layer_z>=10.05 and layer_z<20.05}  M201 X4000 Y4000   M204 P4000 R4000 S4000 T4000  {endif}
{if layer_z>=20.05 and layer_z<30.05}  M201 X5000 Y5000   M204 P5000 R5000 S5000 T5000  {endif}
{if layer_z>=30.05 and layer_z<40.05}  M201 X6000 Y6000   M204 P6000 R6000 S6000 T6000  {endif}
{if layer_z>=40.05 and layer_z<50.05}  M201 X7000 Y7000   M204 P7000 R7000 S7000 T7000  {endif}
{if layer_z>=50.05 and layer_z<60.05}  M201 X8000 Y8000   M204 P8000 R8000 S8000 T8000  {endif}
{if layer_z>=60.05 and layer_z<70.05}  M201 X10000 Y10000   M204 P10000 R10000 S10000 T10000  {endif}
{if layer_z>=70.05 and layer_z<80.05}  M201 X12000 Y12000   M204 P12000 R12000 S12000 T12000  {endif}
{if layer_z>=80.05 and layer_z<90.05}  M201 X15000 Y15000   M204 P15000 R15000 S15000 T15000  {endif}
{if layer_z>=90.05}                                 M201 X20000 Y20000   M204 P20000 R20000 S20000 T20000 
{endif}
 

I want everyone to get the most out of their 3d printer, therefore my creations are free. However, if you like what I did, you can show your appreciation trough paypal.me/CreativityCrush. It might encourage me to create more. ;-)