Summary

It is a model of an Elegoo Neptune 4 & 4 Pro in a kit / gift card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors.

All three axes are fully movable!

Print

Print with 0.15 layer hight or lower to bring up the details.

No supports are needed.

Use 3 perimeters and 20% gyroid infill.

Only 31g are needed.

Post processing

The small struts can be removed really quickly and cleanly using a side cutter.

Assembly

All tolerances are 0.2mm, so the kit is easy to assemble. All parts fit together very well.

If a part should be loose, superglue can be used.

To get an Elegoo Neptune 3 Pro, simply omit the small auxiliary component cooler.

Dimensions

The fully assembled model has the following dimensions

Height: 88mm

Depth: 65mm

Width: 63.3mm

The kit card has the following dimensions when printed

Height: 15mm

Depth: 119mm

Width: 129mm

Scaling will work in a low range due to the tolerances. 

Other modelsI will also try to publish the Neptune 4 Plus and Max as a model. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Do you like my work? I would be very happy if you would support my work on Ko-fi.