Modular Go-Pro / SJ Cam mount
dashingdale17
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2020-07-23 07:03:55
0
0
000Description
Source du modèle
Avis(0)
Summary
There are 50mm and 100mm long arms that attach to the center piece. You can attach a camera to the arms or use the arms as feet for the stand. The arms can allso attach to each other. The pieces are thightened together with thumbscrews.
The assembly is self explanatory, exept for the thumb screws. Insert a M5 nut in the hexagonal hole, this acts as a jam nut. Enter a M5 Allen key bolt form the end with the round hole and tighten it finger thignt.
Hardware needed:
One (1) M5x45 Allen key bolt and m5 nut per thumb screw
One (1) M5 nut per arm
Four (4) M5 nuts per center piece.
Print Settings
Printer Brand:
FlashForge
Printer:
Dreamer
Rafts:
No
Supports:
No
Resolution:
0.2
Notes:
Can be printed in PLA, ABS or PetG prefered as it is not that brittle. Please scale model to compensate shrinkage.rn
Source du modèle
Lien original: Voir les détails
CC BY